User's Manual
Table Of Contents
- Safety Information
- About this user guide
- 1 About the Trimble Juno T41 handheld
- 2 Using the phone
- 3 Using the operating system
- The main screens
- Interacting with the handheld, opening applications
- Changing button assignments
- Battery status indicators
- Speaker and network status indicators
- Pre-installed programs
- Changing screen settings
- Using the on-screen keyboard
- Writing or drawing on the screen
- Making a recording
- Sounds and notifications
- Adjusting the display and keypad brightness
- Using the flashlight
- Calibrating the compass
- Installing applications onto the handheld
- Storing data
- Working with files
- Working with Task Manager
- Using Battery Logger
- Using E-mail
- 4 Connecting and syncing to an office computer
- 5 Using the integrated radios
- Choosing a connection method
- Turning on and turning off the integrated radios
- Using the Wireless Manager
- Connecting to a Wi-Fi access point
- Using the Summit utility
- Turning on and turning off the Bluetooth radio from within the Bluetooth appl...
- Making the handheld visible (discoverable) to other Bluetooth devices
- Connecting to a Bluetooth-enabled device
- Accessing a corporate network
- 6 Using the GNSS receiver
- 7 Using the camera
- 8 Using the barcode imager
- 9 Using the UHF RFID scanner
4 Connecting and syncing to an office computer
When the handheld device and the computer are connected, you can manage the connection
through a window that appears on the office computer. See one of the following:
l Managing the connection using the Windows Mobile Device Center, page 60
l Managing the connection using ActiveSync technology, page 60
Managing the connection using the Windows Mobile Device
Center
1. Connect the handheld device to the computer Connecting and syncing to an office computer,
page 58.
2. If the Autoplay window appears, close the window.
3.
The Windows Mobile Device Center window displays the message Connected:
Note – If the connection is not made automatically, check that the connection is enabled in the Windows
Mobile Device Center software and on the handheld.
4. Do one of the following:
ll To synchronize files and data between the handheld device and a computer, click Set up
your device and then follow the instructions on screen.
l To transfer data between the handheld device and the computer without synchronizing
the devices, click Connect without setting up your device.
5. To transfer files between the computer and the handheld device, click File Management. A
Windows Explorer type window appears, displaying files stored on the handheld device. Copy
and paste files to other locations on the computer, or from the computer to the handheld
device.
6. To install software onto the handheld device, see Installing applications onto the handheld,
page 50.
7. To uninstall software from the handheld device, click Programs and Services and then click
Add/Remove Programs.
Tip – If the Add/Remove Programs option does not appear below Programs and Services, click More. The
Add/Remove Programs option appears.
For more information, refer to the Microsoft Windows Mobile Device Center Help.
Managing the connection using ActiveSync technology
1.
Connect the handheld device to the computer (see Connecting and syncing to an office
computer, page 58). The Synchronization Setup Wizard appears:
Trimble Juno T41 User Guide 60