User's Manual

5 Using the integrated radios
Choosing a connection method
This section describes how to enable the radios, and the main connectivity options available. Use
the table below to identify the wireless connection type you want to make and then follow the steps
provided.
Connection
method
To... See...
Cellular modem Connect to a cellular network
Manually connecting to
a cellular network from
the modem, page 32
Wi-Fi Connect to a Wi-Fi access point
Connecting to a Wi-Fi
access point, page 64
Bluetooth
wireless
technology
Connect to another Bluetooth-enabled device
Connecting to a
Bluetooth-enabled
device , page 67
Wi-Fi, or cellular
modem
Access a corporate network (Virtual Private
Network)
Accessing a corporate
network, page 69
Turning on and turning off the integrated radios
To save power and optimize battery life, turn off wireless radios when they are not in use.
You can use the Wireless Manager application to turn on and turn off the handheld's Bluetooth and
Wi-Fi radios, and the handheld's cellular modem (see Using the Wireless Manager, page 1).
You can also turn on or turn off the Bluetooth radio from within the Bluetooth application (see
Turning on and turning off the Bluetooth radio from within the Bluetooth application, page 1).
To make the handheld visible to other Bluetooth-enabled devices and enable them to connect, see
Making the handheld visible (discoverable) to other Bluetooth devices (page 1).
Using the Wireless Manager
You can use the Wireless Manager application to turn on and turn off the Wi-Fi and Bluetooth
radios and the cellular modem. You can turn on and turn off any of the radios at the same time, or
control each individually.
To open the Wireless Manager, do one of the following:
l Tap the title bar, tap any of the radio icons and then tap Wireless Manager.
l
Tap /Settings/Connections/Wireless Manager.
Trimble Juno T41 User Guide 63