User's Manual

5 Using the integrated radios
Turn on the Wi-Fi and/or Bluetooth radio to be able to connect to other devices or networks.
Turn on the cellular modem to be able to send and receive data, and send text messages.
Turn off the Wi-Fi and/or Bluetooth radio, and/or cellular modemto prevent the handheld from
sending or receiving wireless signals.
To conserve power, turn off the radios when not in use.
To turn the radios on or off, do one of the following:
l Tap All at the top of the screen to turn on the radios, or to turn off all the radios if they are
already on.
l Tap Wi-Fi, Bluetooth, or Phone to turn on the radio that you want to use, or to turn off the
radio if it is already on.
The status fields below the Wi-Fi button, Bluetooth button, and the Phone button change from Off
when the radios are turned on and show the current state of the radio. The Wi-Fi status field shows
Connecting or Available, the Bluetooth status field shows On or Visible, and the Phone status field
shows On or the name of the cellular network that you are connected to.
To exit the Wireless Manager, tap .
Connecting to a Wi-Fi access point
To connect to a Wi-Fi access point, you must:
1. Set up the Wi-Fi connection.
2. Connect to the Wi-Fi network or access point.
Note – If you have installed a personal certificate on the handheld, you do not need to set up the wireless
connection manually as described in Step 1. To connect to the network or access point go to Step 2:
Connecting to the network or access point.
Step 1: Setting up the Wi-Fi connection
1.
Tap / Settings / Connections /Wireless Manager.
2. Tap Menu and then select Wi-Fi Settings. Any networks that you have already configured are
displayed in the list of preferred networks.
3. To add a new network, tap Add New. To change the settings for an existing network, tap the
network.
4. Enter the name of the network and other connection details and then tap Next.
Trimble Juno T41 User Guide 64