User's Manual
Table Of Contents
- Safety Information
- About this user guide
- 1 About the Trimble Juno T41 handheld
- 2 Using the phone
- 3 Using the operating system
- The main screens
- Interacting with the handheld, opening applications
- Changing button assignments
- Battery status indicators
- Speaker and network status indicators
- Pre-installed programs
- Changing screen settings
- Using the on-screen keyboard
- Writing or drawing on the screen
- Making a recording
- Sounds and notifications
- Adjusting the display and keypad brightness
- Using the flashlight
- Calibrating the compass
- Installing applications onto the handheld
- Storing data
- Working with files
- Working with Task Manager
- Using Battery Logger
- Using E-mail
- 4 Connecting and syncing to an office computer
- 5 Using the integrated radios
- Choosing a connection method
- Turning on and turning off the integrated radios
- Using the Wireless Manager
- Connecting to a Wi-Fi access point
- Using the Summit utility
- Turning on and turning off the Bluetooth radio from within the Bluetooth appl...
- Making the handheld visible (discoverable) to other Bluetooth devices
- Connecting to a Bluetooth-enabled device
- Accessing a corporate network
- 6 Using the GNSS receiver
- 7 Using the camera
- 8 Using the barcode imager
- 9 Using the UHF RFID scanner
5 Using the integrated radios
Making the handheld visible (discoverable) to other
Bluetooth devices
To allow other Bluetooth-enabled devices to connect to the device, or if the device will not connect
to or pair with another device you are attempting to connect to, you must make the device visible
(also referred to as “discoverable”).
To make the device visible to other devices:
1.
Tap / Settings/ Bluetooth.
2. Tap the Mode tab.
3. Select the Turn on Bluetooth check box, if it is not already selected.
4. Select the Make this device visible to other devices check box, and tap OK.
Connecting to a Bluetooth-enabled device
To use another Bluetooth-enabled device with the Juno T41 handheld, you must form a Bluetooth
connection between the two devices, during which you select the type of service to use for the
connection. This defines how the devices will communicate with each other.
After forming the Bluetooth connection between the devices you may need to configure settings for
the connection such as the COM port for the field software to use, or the number for the phone to
dial. You must then connect to the other device using the appropriate software application.
To connect the handheld to another Bluetooth-enabled device, you can use either a paired
connection or a non-paired connection.
To access Bluetooth settings, tap / Settings / Bluetooth. You can set the following:
l Mode: To enable Bluetooth, select the check box Turn on Bluetooth. If you want other
Bluetooth devices to find the device, select the check box Make this device visible to other
devices.
l Devices: Tap Add new device to search for other Bluetooth devices. For enhanced security, use
passcodes.
l COM Ports: Available only for Bluetooth-connected devices that support serial (COM)
connections.
l Power:
ll When the check box Maintain Bluetooth connections when device is turned off is selected,
Bluetooth connections on the device are not terminated when the device is turned off
(suspended). When the device is turned back on, the Bluetooth connections are still
active, provided the other Bluetooth device is still connected (the other device may not
have this feature and may disconnect.)
Trimble Juno T41 User Guide 67