User's Manual
Table Of Contents
- Safety Information
- About this user guide
- 1 About the Trimble Juno T41 handheld
- 2 Using the phone
- 3 Using the operating system
- The main screens
- Interacting with the handheld, opening applications
- Changing button assignments
- Battery status indicators
- Speaker and network status indicators
- Pre-installed programs
- Changing screen settings
- Using the on-screen keyboard
- Writing or drawing on the screen
- Making a recording
- Sounds and notifications
- Adjusting the display and keypad brightness
- Using the flashlight
- Calibrating the compass
- Installing applications onto the handheld
- Storing data
- Working with files
- Working with Task Manager
- Using Battery Logger
- Using E-mail
- 4 Connecting and syncing to an office computer
- 5 Using the integrated radios
- Choosing a connection method
- Turning on and turning off the integrated radios
- Using the Wireless Manager
- Connecting to a Wi-Fi access point
- Using the Summit utility
- Turning on and turning off the Bluetooth radio from within the Bluetooth appl...
- Making the handheld visible (discoverable) to other Bluetooth devices
- Connecting to a Bluetooth-enabled device
- Accessing a corporate network
- 6 Using the GNSS receiver
- 7 Using the camera
- 8 Using the barcode imager
- 9 Using the UHF RFID scanner
5 Using the integrated radios
Disconnecting from a Bluetooth device
1.
Tap / Settings / Bluetooth / Devices.
2. Tap the name of the connected Bluetooth device you want to disconnect
Tap the connected device in the list of Bluetooth devices on the Bluetooth settings screen, then tap
OKto confirm that you want to disconnect.
Unpairing a Bluetooth device
You can unpair a Bluetooth device to delete all pairing information about it. Tap next to the
device in the list of Bluetooth devices, then tap Unpair.
Accessing a corporate network
Use a Virtual Private Network (VPN)connection to access a corporate network or Intranet.
Before you begin, obtain the following information from your network administrator:
l username and password
l domain name
l host name or IPaddress of the VPNserver
To access a corporate network through your Internet connection, you must:
1. Set up an Internet connection on the handheld.
2. Set up a VPNconnection.
3. Connect to the corporate network or Intranet.
Step 1: Setting up an Internet connection on the handheld
Do one of the following:
l Connect to the Internet using the cellular modem. For more information, see Manually
connecting to a cellular network from the modem, page 32.
l Set up a Wi-Fi connection access point. For more information, see Connecting to a Wi-Fi access
point, page 64.
Trimble Juno T41 User Guide 69