User's Manual
Table Of Contents
- Safety Information
- About this user guide
- 1 About the Trimble Juno T41 handheld
- 2 Using the phone
- 3 Using the operating system
- The main screens
- Interacting with the handheld, opening applications
- Changing button assignments
- Battery status indicators
- Speaker and network status indicators
- Pre-installed programs
- Changing screen settings
- Using the on-screen keyboard
- Writing or drawing on the screen
- Making a recording
- Sounds and notifications
- Adjusting the display and keypad brightness
- Using the flashlight
- Calibrating the compass
- Installing applications onto the handheld
- Storing data
- Working with files
- Working with Task Manager
- Using Battery Logger
- Using E-mail
- 4 Connecting and syncing to an office computer
- 5 Using the integrated radios
- Choosing a connection method
- Turning on and turning off the integrated radios
- Using the Wireless Manager
- Connecting to a Wi-Fi access point
- Using the Summit utility
- Turning on and turning off the Bluetooth radio from within the Bluetooth appl...
- Making the handheld visible (discoverable) to other Bluetooth devices
- Connecting to a Bluetooth-enabled device
- Accessing a corporate network
- 6 Using the GNSS receiver
- 7 Using the camera
- 8 Using the barcode imager
- 9 Using the UHF RFID scanner
5 Using the integrated radios
Step 2: Setting up a VPN connection
1.
On the handheld, tap /Settings/ Connections / Connections.
2. From the My Work Network list, tap Add a new VPN server connection.
3. Follow the instructions in the Make New Connection wizard.
4. Tap Finish.
Step 3: Connecting to the corporate network or Intranet
To connect to the corporate network or Intranet, simply start using Internet Explorer.
The Windows Embedded Handheld operating system automatically controls whether the VPN
connection is used, depending on whether the URL contains a period. For example, the URL
www.trimble.com contains periods, and so the connection to this website is made without using
the VPN connection. However, an address to a network computer or file server that does not
contain periods automatically starts the VPN connection.
If you need to use the VPN connection to access URL addresses that contain periods, specify
exceptions for the addresses that are within the corporate network. To do this:
1.
Tap /Settings/ Connections / Connections.
2. Tap the Advanced tab.
3. Tap Exceptions.... The Work URL Exceptions screen appears.
4. Tap Add new URL.
5. Enter the URL and then tap OK.
6. Repeat Step 4 and Step 5 as required.
7. Tap OK to return to the Advanced tab of the Connections screen.
8. Tap OK to close the Connections screen.
9.
Tap to close the Settings screen.
Trimble Juno T41 User Guide 70