User's Manual
Table Of Contents
- Safety Information
- About this user guide
- 1 About the Trimble Juno T41 handheld
- 2 Using the phone
- 3 Using the operating system
- The main screens
- Interacting with the handheld, opening applications
- Changing button assignments
- Battery status indicators
- Speaker and network status indicators
- Pre-installed programs
- Changing screen settings
- Using the on-screen keyboard
- Writing or drawing on the screen
- Making a recording
- Sounds and notifications
- Adjusting the display and keypad brightness
- Using the flashlight
- Calibrating the compass
- Installing applications onto the handheld
- Storing data
- Working with files
- Working with Task Manager
- Using Battery Logger
- Using E-mail
- 4 Connecting and syncing to an office computer
- 5 Using the integrated radios
- Choosing a connection method
- Turning on and turning off the integrated radios
- Using the Wireless Manager
- Connecting to a Wi-Fi access point
- Using the Summit utility
- Turning on and turning off the Bluetooth radio from within the Bluetooth appl...
- Making the handheld visible (discoverable) to other Bluetooth devices
- Connecting to a Bluetooth-enabled device
- Accessing a corporate network
- 6 Using the GNSS receiver
- 7 Using the camera
- 8 Using the barcode imager
- 9 Using the UHF RFID scanner
6 Using the GNSS receiver
Exiting GPS applications
Any time you exit a GPS application (such as SatViewer) it is advisable to close the port, for example,
tap Disconnect from GPS and then exit the application. Failure to do so may leave the port open
and hinder the next GPS operation.
Using an external GNSS antenna
The Juno T41 handheld provides an external GNSS antenna port, which is suitable for use in most
conditions. This port is suitable for GPSantennas only.
CAUTION - The presence of any dust or moisture in the external antenna port may cause the external antenna to
not work. To prevent dust or moisture entering the external antenna slot, take care when using the handheld with
an external antenna in wet or dusty conditions.
To use an external antenna, you must configure antenna settings in the GNSS field software, once
you have connected the external antenna to the handheld. Refer to the relevant software
documentation for details.
Trimble Juno T41 User Guide 73