User's Manual
Table Of Contents
- Safety Information
- About this user guide
- 1 About the Trimble Juno T41 handheld
- 2 Using the phone
- 3 Using the operating system
- The main screens
- Interacting with the handheld, opening applications
- Changing button assignments
- Battery status indicators
- Speaker and network status indicators
- Pre-installed programs
- Changing screen settings
- Using the on-screen keyboard
- Writing or drawing on the screen
- Making a recording
- Sounds and notifications
- Adjusting the display and keypad brightness
- Using the flashlight
- Calibrating the compass
- Installing applications onto the handheld
- Storing data
- Working with files
- Working with Task Manager
- Using Battery Logger
- Using E-mail
- 4 Connecting and syncing to an office computer
- 5 Using the integrated radios
- Choosing a connection method
- Turning on and turning off the integrated radios
- Using the Wireless Manager
- Connecting to a Wi-Fi access point
- Using the Summit utility
- Turning on and turning off the Bluetooth radio from within the Bluetooth appl...
- Making the handheld visible (discoverable) to other Bluetooth devices
- Connecting to a Bluetooth-enabled device
- Accessing a corporate network
- 6 Using the GNSS receiver
- 7 Using the camera
- 8 Using the barcode imager
- 9 Using the UHF RFID scanner
7 Using the camera
Starting and exiting the camera app
To start the Camera app, tap / Pictures & Videos , then tap the Camera icon or the Camera tile
(or press the left programmable button under the Camera tile, unless it has been assigned to some
other application).
Note – If you do not see the Camera icon, your handheld does not have an integrated camera.
To exit the Camera app, tap on the camera screen, or press OK.
Taking a photo or recording a video
When the camera application is started, it is by default in Still (photo) mode.
Note – The thumbnail that is displayed at the top of the camera screen is the most recently captured image.
You can tap on it to work with it in Pictures &Videos.
To capture a photo:
1. Hold the handheld steady. Use the preview window to frame the subject in the centre of the
frame.
2. If Focus is Enabled (see Camera setting options, page 76), quickly double-tap the preview
window to manually focus the camera. A white box appears, which then turns green. If you do
not double-tap the preview window, the camera assumes that the distant focus (that is, targets
> 1m or so away) is ok, and it does not autofocus.
3.
To capture the photo, tap the Camera icon on the screen. Or Tap the Action button
on the left side of the handheld.
Photos are stored with a .jpg file extension. See Managing photos and videos, page 1.
To capture a video:
1.
Tap the Video icon on the screen.
2. Use the preview window to frame the start of the video.
3.
To start recording, tap the Record icon on the screen. Move the handheld to record
the video.
4. To pause recording, tap the Pause icon. To stop recording, tap the Stop icon.
Trimble Juno T41 User Guide 75