User's Manual
Table Of Contents
- Safety Information
- About this user guide
- 1 About the Trimble Juno T41 handheld
- 2 Using the phone
- 3 Using the operating system
- The main screens
- Interacting with the handheld, opening applications
- Changing button assignments
- Battery status indicators
- Speaker and network status indicators
- Pre-installed programs
- Changing screen settings
- Using the on-screen keyboard
- Writing or drawing on the screen
- Making a recording
- Sounds and notifications
- Adjusting the display and keypad brightness
- Using the flashlight
- Calibrating the compass
- Installing applications onto the handheld
- Storing data
- Working with files
- Working with Task Manager
- Using Battery Logger
- Using E-mail
- 4 Connecting and syncing to an office computer
- 5 Using the integrated radios
- Choosing a connection method
- Turning on and turning off the integrated radios
- Using the Wireless Manager
- Connecting to a Wi-Fi access point
- Using the Summit utility
- Turning on and turning off the Bluetooth radio from within the Bluetooth appl...
- Making the handheld visible (discoverable) to other Bluetooth devices
- Connecting to a Bluetooth-enabled device
- Accessing a corporate network
- 6 Using the GNSS receiver
- 7 Using the camera
- 8 Using the barcode imager
- 9 Using the UHF RFID scanner
7 Using the camera
Control Settings Mode
places lit with Fluorescent lighting.
Zoom
1.0x [Minimum Zoom], 1.5x, 2.0x, 2.5x , 3.0x, 3.5x, 4.0x [Maximum Zoom].
Selection of any option applies that setting to camera preview and to
images captured.
Note –
The Image Tagging of date-time and GPS on the image is not compatible
with a Digital Zoom setting other than 1.0x. The EXIF tagging is not affected by
Digital Zoom.
Still
Brightness
+3 [Maximum Brightness], +2, +1, 0 [Normal Brightness], -1, -2, -3
[Minimum Brightness].
The selected option applies that setting to the camera preview and to
images captured. Increase the brightness if the subject is underexposed, or
decrease the brightness if the subject is overexposed. A common situation
requiring adjustment to brightness is capturing a scene with high contrast
caused by direct exposure of light sources or areas of shading or shadows.
Still and
video
Flash
settings
l
On: enable the flash; the flash icon appears on the screen and
dual LEDs will flash while capturing images.
l Off: disable the LED flash.
l Auto: enable the LEDs to flash if needed to illuminate the scenes with
low-light. The auto flash icon displays on the screen.
Still
Image
quality
l Economy: save the captured image with low quality (high
compression).
l Normal: save the captured image with medium quality (medium
compression).
l Fine: save the captured image with good quality (low compression).
l Super Fine: save the captured image with very good quality (very low
compression).
Images are stored with the selected quality; the file size of the image
increases as quality increases.
Still
Audio
Record
l Enable: Audio capture from the microphone is enabled while
recording.
l Disable: The video that is recorded does not include any sound.
Video
Trimble Juno T41 User Guide 80