User's Manual
25
P D L U ser's G uide
APPENDIX B - PIN-OUTS AND CONNECTORS
PDL High Power Base
The PDL Base data receptacle is a LEMO PN HGG.1B.305.CLLP. For a mating plug, we recommend
LEMO PN FGG.1B.305.CLAD.72Z. Refer to Table 2 and Figure 6 for pin-outs and orientation.
PDL Low Power Base and Rover
The PDL Rover data receptacle is a LEMO PN HMG.0B.305.CLN. For a mating plug, we recommend
LEMO PN FHG.0B.305.CLAD.52Z. Refer to Table 2 and Figure 7 for connector pin assignments.
Table 3 - PDL Base and Rover Pin Assignments
Pin # Description Cable Wire Color
1 Power Red
2 Ground Black
3 RS-232 RX Data Yellow
4 RS-232 Signal Ground White
5 RS-232 TX Data Green
Antenna
The PDL High Power Base antenna connector is a BNC female. For a mating plug, we recommend
Amphenol PN 31-320. Use only high quality 50 impedance cable for the antenna connection.
The PDL Low Power Base and Rover antenna connector is an industry standard NMO. The impedence
is 50.
Connector Manufacturer Contacts
Contact LEMO USA by calling 1-707-578-8811
Contact Amphenol by calling 1-203-743-9272
Figure 8 - PDL Data/Power Connectors