User's Manual

Setting up the phone features

Installing (or changing) the SIM card

1. Hold down the

Power

key for about 3 seconds to display the

power menu. Tap on

Replace Battery/SIM

to ensure that the

alarms will not wake up the Nomad.

2. Remove the hand strap.

3. Use the screwdriver on the end of your stylus or use a small

#1 Philips head screwdriver to loosen the four screws in the

battery door.

4. Remove the battery from the unit.

5. Slide the silver SIM carriage to

the unlocked position (to the right).

6. Gently open the hinged SIM

carriage door, and place the SIM

card (purchased from your

cellular service provider) into the

slot. The golden contacts should

be facing down. Also ensure that

the notched corner aligns with

the angled corner on the SIM carriage.

7. Close the SIM carriage and then slide it to the locked position

(to the left).

8. Place the battery into the unit.

9. Place the battery door over the battery, with the flat side of

the battery door at the top of the unit. Use the screwdriver end

of the stylus or screwdriver to gently tighten the four screws.

10. Replace the hand strap.

11. Turn the unit ON to resume operation.