User Manual

10 Pacific Crest Corporation - PDL Base User’s Guide
General
Interface
RS-232 compatible interface configurable for 150 to 38,400 baud operation with
one start, 8 data, optional parity, and one stop bit.
Power Supply
Power supplied externally through the RS-232 / Power connector (9 - 16 VDC).
Typical power consumption during TX is 110 Watts and 1.9 Watts during RX.
Radio Transceiver
Frequency Ranges
Contact factory for currently available frequency ranges.
Frequency Control
Synthesized 12.5 kHz resolution, ±2.5 ppm crystal stability standard.
Channel Spacing
Channel spacing 12.5 kHz and 25 kHz.
RF Output Power
2 Watt ±20% (LO power switch setting).
35 Watt ±20% (HI power switch setting).
Receiver
Sensitivity -116 dBm or better (12dB SINAD). Selectivity -70 dB at 25 kHz.
Modem