User Manual

Pacific Crest Corporation – PDL Base User’s Guide 3
Digital Display – A seven-segment LED used to indicate channel status and
other diagnostic information.
TX Indicator – An LED indicator which will light when the unit is transmitting
data.
RX Indicator – An LED indicator which will light when the unit is receiving data.
AMP POWER Indicator – An LED indicator which shows the selected RF output
level. The desired level is selected with the Amp Power Selector Switch located
on the back panel. The LED is off when the “LO” (2 Watt) position is selected,
and on when the “HI” (35 Watt) position is selected.