User's Manual
Table Of Contents
- NOTICE
- CAUTIONS AND WARNINGS
- INTRODUCTION
- FEATURES AND BENEFITS
- SETTING UP THE PDL HIGH POWER BASE
- SETTING UP THE PDL LOW POWER BASE/REPEATER (PDL
- SETTING UP THE PDL ROVER
- TIPS AND TECHNIQUES FOR BEST PERFORMANCE
- FCC RULES AND REGULATIONS
- SERVICE AND SUPPORT
- WARRANTY
- APPENDIX A - SAFETY INFORMATION
- APPENDIX B - PIN-OUTS AND CONNECTORS
- APPENDIX C - TECHNICAL SPECIFICATIONS
PDL User's Guide 11
Connect the antenna, GPS Data Cable and Battery Power Cable
as indicated in Figure 3. You are now ready to turn-on the
system.
Configuring the GPS Reference Station
Refer to the GPS receiver model specific addendum that is
included with this manual for specific instructions on configuring
your GPS reference station for optimal performance with the
PDL. Detailed instructions are also available on our web site at
www.paccrst.com.
PDL Default Settings
The PDL Base is configured at the factory with settings that have
been determined to provide excellent system performance. Use
the PDLCONF software provided with the product to view and
change configuration settings.
9
Note: Please refer to the PDLCONF help menu system
for detailed information concerning the settings.