User's Manual
Table Of Contents
- NOTICE
- CAUTIONS AND WARNINGS
- INTRODUCTION
- FEATURES AND BENEFITS
- SETTING UP THE PDL HIGH POWER BASE
- SETTING UP THE PDL LOW POWER BASE/REPEATER (PDL
- SETTING UP THE PDL ROVER
- TIPS AND TECHNIQUES FOR BEST PERFORMANCE
- FCC RULES AND REGULATIONS
- SERVICE AND SUPPORT
- WARRANTY
- APPENDIX A - SAFETY INFORMATION
- APPENDIX B - PIN-OUTS AND CONNECTORS
- APPENDIX C - TECHNICAL SPECIFICATIONS
20 Setting Up the PDL Low Power Base/Repeater
button. Use the CHANNEL button to select the channel of
operation, or select "r" for the AutoRover function or select "b"
for the AutoBase function. Refer to the How to Use AutoRover
and How to Use AutoBase sections of this manual for detailed
instructions concerning these features.
Configuring the GPS Rover
See the GPS receiver model addendum that is included with this
manual for specific instructions on configuring your GPS rover
for optimal performance with the PDL. Detailed instructions are
also available on our web site at www.pacificcrest.com.
PDL LPB Default Settings
Refer to Table 1 in Setting Up the PDL HPB for the default
factory settings of your PDL LPB.