User's Manual
Table Of Contents
- NOTICE
- CAUTIONS AND WARNINGS
- INTRODUCTION
- FEATURES AND BENEFITS
- SETTING UP THE PDL HIGH POWER BASE
- SETTING UP THE PDL LOW POWER BASE/REPEATER (PDL
- SETTING UP THE PDL ROVER
- TIPS AND TECHNIQUES FOR BEST PERFORMANCE
- FCC RULES AND REGULATIONS
- SERVICE AND SUPPORT
- WARRANTY
- APPENDIX A - SAFETY INFORMATION
- APPENDIX B - PIN-OUTS AND CONNECTORS
- APPENDIX C - TECHNICAL SPECIFICATIONS
22 Setting Up the PDL Rover
Antenna Connector (NMO thread)
Internal Battery Pack
Antenna
RX Indicator
Power On/Off Indicator
Digital Display
Channel Change Pushbutton
ON / OFF Pushbutton
Data / Power Connector
User Supplied Range Pole
(5/8 - 11 thread)
Figure 6 - PDL Rover
Display
The seven-segment, numeric display is used to indicate the
channel or mode selection. To conserve power, the display is
only lit for a short period following the pressing of the CHANNEL
or ON/OFF buttons. Channel selections range from Channel 0
to Channel 15. Two digit channel numbers are displayed by
alternately flashing a "1" followed by the second digit.