User's Manual
Table Of Contents
- NOTICE
- CAUTIONS AND WARNINGS
- INTRODUCTION
- FEATURES AND BENEFITS
- SETTING UP THE PDL HIGH POWER BASE
- SETTING UP THE PDL LOW POWER BASE/REPEATER (PDL
- SETTING UP THE PDL ROVER
- TIPS AND TECHNIQUES FOR BEST PERFORMANCE
- FCC RULES AND REGULATIONS
- SERVICE AND SUPPORT
- WARRANTY
- APPENDIX A - SAFETY INFORMATION
- APPENDIX B - PIN-OUTS AND CONNECTORS
- APPENDIX C - TECHNICAL SPECIFICATIONS
PDL User's Guide 27
9
Warning: The internal Lithium-Ion battery is NOT
USER SERVICEABLE. Do not attempt to open the
enclosure or replace the battery. Lithium-Ion batteries
can be dangerous if mishandled.
The PDL Rover has a built-in charger that monitors and controls
the charging of the internal battery. The internal battery quickly
charges in less than 4 hours, and can be charged with the
supplied charger, or from an external 12 volt supply. We
recommend charging the internal battery at room temperature.
Charging is inhibited if the ambient temperature is below 0° C or
above 40° C.
9
Warning: The internal battery must not be subject to
operating temperatures below -20° C. Subjecting the
battery to conditions below -20° C will produce
permanent battery damage, and is not covered by the
warranty.