User's Manual

Advanced: You can set specific Wi-Fi settings required by some

networks. Administrators can also set a password to limit

access to configuration settings.

Exchange ActiveSync: Exchange ActiveSync, a component of

Exchange Server, facilitates data synchronization between your unit

and an Exchange server. This synchronization can occur over a

network connection, allowing you to update calendars, contacts,

tasks and the Inbox on your unit without directly connecting to a

PC. The server must be running Exchange Server 2003 SP2 or later.

To use Exchange ActiveSync, confirm with your system

administrator that an Exchange Server is available. The administrator

will provide you with a login name, password, server name, and

domain name. To configure Exchange ActiveSync on your unit, tap

/ ActiveSync / Menu / Add Server Source. Enter the user name,

password and domain and tap Next. Choose the data types you want

to synchronize and tap Finish. Enter the server address and confirm

with your administrator whether the Exchange server requires an

encrypted (SSL) connection. Tap Next.

Troubleshooting Wi-Fi connection problems: If the unit seems to

be connected to the network, but you are having difficulty using the

network connection, tap / Settings / Connections / Wi-Fi. The

Network Cards window will open and allow you to confirm that the

connection is appropriately configured as either a Work or Internet

connection. If you are unable to connect to a network, try

connecting to another network without any security, such as a Wi-Fi

hotspot, to determine if the issue is the hardware or the network.

Installing additional software on your unit

Third-party software designed for Microsoft Windows Mobile

installed by running a setup program on the PC while the unit is

connected over ActiveSync or Windows Mobile Device Center

Some programs are CAB files that need to be transferred to your

unit and executed from the unit.

Follow the setup instructions that came with your software. If

prompted, perform a reset to complete the installation.