User's Manual

9. Close the plastic regulatory label.

10. Place the battery into the unit.

11. Turn the latch located above the battery clockwise.

12. Replace the hand strap.

Setting up the cellular data connection using CellStart

(Optional on certain device offerings; may not be installed.)

1. Tap / CellStart. (You may need to tap OK to agree to the

terms to open the program.) Under Available Settings, tap the

[+] by your country to expand carriers.

2. Tap the [+] by the carrier you have signed up with and

highlight Typical and tap New. (If using multiple configuration

settings, you can tap on the primary setting and tap Default.)

3. Ensure the phone is turned on. Tap / Settings /

Connections / Wireless Manager / Phone.

4. Test the settings by tapping / Internet Explorer and then

browse to a web page. The phone will automatically start

dialing when you try to open a web page.

5. If the phone will not connect, try other settings before calling

the carrier technical support.

6. You can also manually change phone settings by tapping /

Settings / Connections / Connections / Manage existing

connections. Select the newly created connection and tap Edit.

NOTE: Once connected, G (GPRS) or E (EDGE - a faster form of

GPRS) or H (HSDPA) will automatically appear in the notification

bar depending on the network capabilities in that area; some service

providers may only provide GPRS.

Removing cellular data settings

1. Tap / CellStart.

2. Tap Refresh to see the current list of configurations.

3. Select the configured data setting you wish to remove.

4. Tap Remove and OK.

NOTE: After removing a default configuration, the top setting

will become the new default.

To access the detailed settings for each configuration, tap Menu /

Open Connections Applet for the Connections Settings.