User's Manual

Speaker and microphone

Your unit comes with an integrated speaker and a microphone. It

also has a 3.5 mm audio jack that is wired for a headset with a

stereo speaker and microphone combination. To record, tap /

Notes (or hold down the Fn key and the 5 key). If you do not see

the Recording toolbar, tap Menu / View Recording Toolbar. Tap

the round Record symbol on the screen. The unit will record until

the square Stop symbol is pressed. The recorded file will be saved

in the Notes folder.

Power key features

The Power key turns the unit on and off and performs a number of

additional functions.

Power menu: Hold down the Power key for about 3 seconds to

display a countdown. Continuing to press the Power key will cause

a reset when the countdown reaches zero. If you release the Power

key while the countdown is proceeding, you access the following

menu. Tap an option or OK to exit.

Clean Screen: Disables the

touchscreen for cleaning. Press the

enter key to re-enable the

touchscreen.

Align Touchscreen: Repeats the

alignment procedure.

Replace Battery/SIM: Ensures that

alarms will not wake up the unit while

changing the battery or accessing the

SD card or the SIM under the battery.

Shutdown: Intended for long-term storage to put the unit in its lowest power mode.

Running application state and unsaved data will be lost. Internal GPS parameters will be

reset to their default settings. To take the unit out of the shutdown mode, press the power

key and the unit will boot up. NOTE: While in shutdown mode, the battery LED does not

work, but if the AC adapter is plugged in, it will still charge.

Reset: Stops all running programs and restarts the unit. No file system data is lost, only

open or unsaved files will be lost. All registry settings, control panel, personal

information, GPS settings and databases are preserved.

NOTE: If the countdown or the Power menu does not appear when the power button is

held down, continue to hold down the power button for at least 8 seconds to start the

reset. It may take up to 10 seconds for the unit to start after the power button has been

released.