User's Manual

24
Working with the Camera
Depending upon the configuration of your unit, it may have an
integrated digital camera. To find out if you have a camera installed
in your unit, tap / Settings / System / System Information /
CardPort and see if it is listed under Cardport Devices.
Using the Camera:
1. From the Home Screen, tap Pictures / All Photos to open up
Pictures & Videos or tap / Pictures & Videos.
2. Tap on Camera.
3. Lightly press the key halfway to focus the image.
4. Press until the Enter or the key clicks to take a picture.
5. Press the key or tap OK to close the picture preview.
(Files are saved in File Explorer (under My Device) / My
Documents / My Pictures.)
NOTE: The camera preserves battery power by going into standby
mode after 30 seconds of no camera usage. Tap the screen or press
a button to resume.
Managing Pictures:
Tap the desired picture.
Send: If you are connected to the internet, press the left key
or tap Send to e-mail the selected picture.
Press the right key or tap Menu to see the following features:
Zoom: A zoom window shows up in the lower right hand corner of
the display. You can zoom in, zoom out or return to normal
view (only on higher resolution pictures).
Play Slide Show: Tap the display to see the icons to pause,
advance, return to the last slide, or stop the slide show.
Set as Home Background: Tap to place the selected picture as the
background of the Home screen.
Beam Picture: For use to beam to another Bluetooth device.
Save: Saves the selected picture to a contact or a jpg.
Edit: Puts a selected picture into an editable mode. To rotate the
picture 90 degrees, tap the left application key Rotate.
Press the right key or tap Menu to select the following: