User's Manual

6
Unit Setup
1. Install the SD card (if desired)
1. Lift up the plastic regulatory label in
the battery compartment.
2. Gently slide the SD card into the slot.
3. Close the plastic regulatory label.
If your unit has the WWAN option, install
the GSM SIM card. See page 30 for installation instructions.
2. Install the battery
The Lithium-Ion (Li-Ion) battery
with the battery cover is shipped
detached from the unit. Insert the
battery at the bottom of the
compartment first so the connector
on the battery mates with the pins
in the battery compartment. Using
your thumb, the flat end of the
stylus or a coin, turn the latch located above the
battery clockwise until tightened.
3. Attach the hand strap
Attach the hand strap to the back case, as
shown.
4. Attach audio jack plug and stylus
Attach the tethers to the back
case, as shown.