User's Manual

be utilized. This can include a typical Internet connection through a

corporate wireless network. A Work connection allows you to view

fileshares on a corporate network and can also be used to remotely

synchronize with your PC if you have already created an

ActiveSync Standard Partnership.

Select Internet or Work as appropriate, and tap Connect.

Depending upon the configuration of the wireless network, you may

be prompted to enter a Wireless Encryption Protocol (WEP) key for

authentication purposes. Obtain the WEP key from your network

administrator.

Tip: Run a system backup after establishing a wLAN connection so

that the settings survive a power loss or unexpected hard reset. See

the Backup and Restore section for more information.

If you chose to create an Internet connection, open Pocket Internet

Explorer on the unit (Start / Internet Explorer) and browse the

Internet much as you would browse the Internet on a PC. Note that

Pocket Internet Explorer does not support some features that are

supported by desktop PC browsers. For instance, there are no pop-

up windows under Pocket Internet Explorer, and you may be unable

to use web-based e-mail and access other sites on the Internet.

If you chose to create a Work

connection, open File Explorer on

unit. Tap Open to open a window,

allowing you to enter the name of a

computer on the network on which

you want to view fileshares. Tap

OK.

From here, you can browse the

network fileshares and copy and

paste files between PCs on the

network and the unit.