GPS Receiver User Manual

Copernicus GPS Receiver 47
INTERFACE CHARACTERISTICS 3
Serial Port Default Settings
The Copernicus GPS Receiver supports two serial ports. The default settings are
provided in the table below.
Table 3.4 Copernicus GPS Receiver Serial Port Default Settings
Note – Data Bits, Parity, Stop Bits and Flow Control are not configurable. Only
Protocol and Baud rates are configurable. Detailed descriptions of these protocols
are defined in the Appendices.
Port Port
Direction
Pin # Protocol Characteristics
Baud Rate Data Bits Parity Stop Bits Flow Control
A TXD-A 23 TSIP-Out 38.4 K 8 None 1 NO
RXD-A 21 TSIP-IN 38.4 K 8 None 1 NO
B TXD-B 24 NMEA-Out 4800 8 None 1 NO
RXD-B 20 NMEA-IN 4800 8 None 1 NO