User's Guide
Chapter 1: Introduction to the Trimble Ranger 5 data
collector / Trimble TSC5 controller
➢ Registration
➢ Configuration options
➢ In the box
➢ Replacement and spare or optional accessories
➢ Parts of the Ranger 5 data collector / TSC5 controller
This user guide describes how to configure and use the Trimble® Ranger® 5 data collector / Trimble
TSC5 controller powered by the Android® 10 operating system. The information in this guide
supplements the information in the Quick Start Guide, which you receive in the box with the device.
Even if you have used other Trimble handheld field computers, data collectors or survey controllers
before, Trimble recommends that you spend some time reading this guide to learn about the special
features of the product.
⚠
WARNING - Before you use this product, make sure that you have read and understood all safety requirements.
Failure to follow these safety instructions could result in fire, electric shock, or other injury, or damage to the
device and/or other property. For more information refer to the Important safety information section of this
guide.
Registration
To receive information regarding updates and new products, contact your local dealer or visit the
Trimble customer registration website at www.trimble.com/register or go to
https://mytrimbleprotected.com/cc/productsRegistration.html. When you register your device, you
can select the newsletter, upgrade, or new product information.
To register your device, you will need the serial number. The serial number is a unique 12 digit
number for your Ranger 5 / TSC5, for example, JAJ201300096, and is located on a label inside the
removable battery / SIM door compartment.
Trimble Ranger 5 Data Collector / Trimble TSC5 Controller User Guide |21