User's Guide
NOTE – the Ranger 5 / TSC5 consumes electricity even when the device is off. Depending on how your
system is configured, if the battery pack is fully charged, it will fully discharge in approximately the
following period of time:
Power state
Discharge period
When power is off
Approximately X days.
In sleep/suspended
Approximately X days.
In hibernation
Approximately X days.
Tethering the stylus
Attach the stylus to the device to prevent accidentally dropping the stylus. The stylus is supplied
with one end of the tether cord pre-looped to the stylus. You can attach the stylus to the left or right
side of the device. To tether the stylus to the device:
1. Take the loose end of the tether cord and push it through the tether point.
2. Feed the stylus through the loop and pull tight.
3. Place the stylus in the stylus dock to store it when not in use (top left corner as in image
below).
Trimble Ranger 5 Data Collector / Trimble TSC5 Controller User Guide |31