User's Guide
adapter and USB-C to USB-C cable included in the packout or the dual bay battery charger
accessory.
Charging the battery pack using the AC adapter and USB-C to USB-C cable included in the
packout
It takes approximately 4 hours to fully charge the Ranger 5 / TSC5 accessory battery pack from an
empty state using the AC adapter and USB-C to USB-C cable included in the packout while charging
outside of the device.
Charging the battery pack using a 3rd party USB-C charger may increase the charge time. Trimble
recommends using the USB-C charger and cable provided in the packout of the Ranger 5 / TSC5 for
best results.
The accessory battery pack is charged using the USB-C port directly on the battery pack.
1. Connect the appropriate international plug adapter for your region to the AC adapter.
2. Connect one end of the USB-C to USB-C cable to the USB-C port located on the AC adaptor.
3. Connect the other end of the USB-C cable to the accessory battery pack.
4. Plug the power supply into an electrical outlet.
LED charging status on the accessory battery pack
<TODO, or link to accessory battery pack user guide when complete>
Checking the battery pack charge level using the battery indicator
You can check the battery level of the accessory battery pack while it is removed from the device.
● Press and hold the button on the battery to check the battery charge level.
Trimble Ranger 5 Data Collector / Trimble TSC5 Controller User Guide |40