User Manual
Table Of Contents
- 5700/5800 GPS Receiver
- Contents
- About This Manual
- 5700 GPS receiver
- Overview
- Setting up the Receiver
- General Operation
- Configuration
- Transferring Data
- Software Utilities
- Specifications
- Default Settings
- Cables and Connectors
- Event Marker Input and 1PPS Output
- 5800 GPS receiver
- Overview
- Setting up the Receiver
- General Operation
- Configuration
- Software Utilities
- Specifications
- Default Settings
- Cables and Connectors
- 5700 & 5800 Appendixes
- NMEA-0183 Output
- Troubleshooting
- Index
12 Setting up the Receiver
128 5800 GPS Receiver User Guide
55800 Operation
12.1Introduction
This chapter provides general information on setup, connection, and
cabling for the 5800 receiver.
12.2Parts of the Receiver
All operating controls on the 5800 receiver are located on the front
panel. Serial ports and connectors are located on the bottom of the
unit.
12.2.1 Front Panel
Figure 12.1 shows the front panel of the 5800 receiver. This panel
contains the three indicator LEDs, and the power button.
Insert graphic of 5800 showing front panel
Figure 12.1 5800 receiver front panel
The power button controls the receiver’s power on or off functions.
The indicator LEDs show the status of power, satellite tracking, and
radio reception. For more information, see LED Behavior, page 139.