User Manual

14 Configuration
146 5700 GPS Receiver User Guide
55800 Operation
14.1Introduction
The 5800 receiver has no controls for changing settings. It can only be
configured using external software such as GPS Configurator,
Configuration Toolbox™, or Trimble Survey Controller.
There are two ways to configure the 5800 receiver:
• Configuring the receiver in real time
• Applying the settings in an application file
This chapter provides a brief overview of each of these methods and
describes the contents and use of application files.
14.2Configuring the Receiver in Real Time
GPS Configurator, Configuration Toolbox, and Trimble Survey
Controller all support real-time configuration of the 5800 receiver.
When you configure the receiver in real time, you use one of these
software applications to specify which settings you want to change.
When you apply the changes, the receiver settings change
immediately.
Any changes that you apply to the receiver are reflected in the Current
application file, which is always present in the receiver. The Current
application file always records the most recent configuration, so if you
apply further changes (either in real time or using an application file)
the Current file is updated and there is no record of the changes that
you applied originally.
For more information on configuring the receiver in real time, see
Chapter 15, Software Utilities.