User Manual

14 Configuration
150 5700 GPS Receiver User Guide
55800 Operation
By default, there is no Power Up application file on the receiver. If
you want to use a Power Up application file, you need to create an
application file in Configuration Toolbox and make sure that the As
auto power up file option is selected in the File page. When you
transfer this file to the receiver, it is transferred with the name
Power_up.cfg, and becomes the new Power Up file.
The Power Up file is the only special application file that you can
overwrite or delete from the receiver.
14.4.2 Applying Application Files
An application file’s settings do not affect the receiver’s configuration
until you apply the application file. You can do this at the same time
that you save the file. Alternatively, you can save the file on the
computer or in the receiver, then open it later and apply its settings.
14.4.3 Storing Application Files
You can store application files that you create in Configuration
Toolbox on both your receiver and computer. Each file can, for
example, represent a different user sharing the same receiver, or a
particular mode of operation or survey style. Saving application files
on your computer as well as in your receiver is optional, but it is useful
because:
• it gives you a permanent copy of the settings you have sent to a
receiver, for audit or your own reference
• you can use the same file to configure multiple receivers
identically
• you can use an existing application file as a template for
creating other application files with similar settings