User Manual
Table Of Contents
- 5700/5800 GPS Receiver
- Contents
- About This Manual
- 5700 GPS receiver
- Overview
- Setting up the Receiver
- General Operation
- Configuration
- Transferring Data
- Software Utilities
- Specifications
- Default Settings
- Cables and Connectors
- Event Marker Input and 1PPS Output
- 5800 GPS receiver
- Overview
- Setting up the Receiver
- General Operation
- Configuration
- Software Utilities
- Specifications
- Default Settings
- Cables and Connectors
- 5700 & 5800 Appendixes
- NMEA-0183 Output
- Troubleshooting
- Index
15 Software Utilities
154 5800 GPS Receiver User Guide
55800 Operation
15.1Introduction
This chapter provides information on the software utilities that you
can use with the 5800 receiver.
15.2GPS Configurator Software
GPS Configurator is a Microsoft Windows application that configures
selected Trimble GPS receivers.
GPS Configurator lets you:
• check current receiver settings and operation
• configure receiver settings with your PC
15.2.1 Installing GPS Configurator
A copy of GPS Configurator is included on the 5700/5800 GPS
Receiver CD-ROM.
To install the software:
1. Insert the CD-ROM into the CD drive on your computer.
2. From the main menu select “Install individual software
packages”.
3. Select “Install GPS Configurator vX.XX”
4. Follow the onscreen instructions.