User Manual
Table Of Contents
- 5700/5800 GPS Receiver
- Contents
- About This Manual
- 5700 GPS receiver
- Overview
- Setting up the Receiver
- General Operation
- Configuration
- Transferring Data
- Software Utilities
- Specifications
- Default Settings
- Cables and Connectors
- Event Marker Input and 1PPS Output
- 5800 GPS receiver
- Overview
- Setting up the Receiver
- General Operation
- Configuration
- Software Utilities
- Specifications
- Default Settings
- Cables and Connectors
- 5700 & 5800 Appendixes
- NMEA-0183 Output
- Troubleshooting
- Index
2 Setting up the Receiver
20 5700/5800 GPS Receiver User Guide
5700 Operation
2.1 Introduction
This chapter provides general setup information, connection
information, and cabling diagrams for the most common uses of the
5700 receiver.
2.2 Parts of the Receiver
All operating controls, ports, and connectors on the 5700 receiver are
located on its four main panels, as shown in Figure 2.1. This section
provides a brief overview of the features of each of these panels.
Figure 2.1 Panels on the 5700 receiver
Bottom
panel
Top
panel
Front
panel
Rear
panel