User Manual

SNB900 Radio Modem User Guide 13
Configuration and Installation 3
32.2 Connecting to an office computer
1. Connect the SNB900 adaptor from the I/O port to a serial COM
port on the computer.
2. Connect the power cable from the POWER connector to a
suitable power source.
30.1 Getting started with WinFlash
To configure the SNB900, run the WinFlash communications setup
utility on an office computer. A Microsoft Windows 95, 98, Me,
Windows NT 4.0 or later, Windows 2000, or Windows XP operating
system is required.
Installing WinFlash
Please refer to the release notes on the SNB900 CD.
Using WinFlash
1. Click the WinFlash icon on the office computer desktop. The
Device Configuration dialog appears: