User's Manual

SPSx50 Modular GPS Receiver User Guide 57
Setting up the Receiver 5
Figure 5.8 Cable-free connections using Bluetooth wireless technology for a rover SPSx80 setup, a TSC2
or TCU controller, and a 900 Mhz base station (with no external power)
Setting up a rover receiver on a belt or in a backpack
The receiver can be work on a belt or carried in a backpack to eliminate weight from
the pole as needed. When you wear the receiver on a belt, ensure that the display is
always visible so that you can easily check the status of the receiver. If you carry the
receiver in a backpack, you should use an external radio antenna mount to allow for
optimal radio signal reception. If you use a low gain antenna mounted directly on the
receiver in a backpack, it may affect the radio signal reception thereby reducing the
likelihood of obtaining an RTK Fixed solution.
20 Dec. With Vanessa