User's Manual

5 Setting up the Receiver
60 SPSx50 Modular GPS Receiver User Guide
Assembling the receivers
Figure 5.11 shows a SPS550 and a SPS550H set up to provide a Heading solution. To
assemble the receivers you need a Phillips head #1 screwdriver and a 1/4" socket set or
wrench (spanner).
Figure 5.11 Completed assembly with SPS550H GPS receiver on top
To assemble the receivers using the mounting frame that is provided:
1. Invert the SPSx50 GPS receiver and remove the rubber endcaps.
2. Prepare the flat black plate and the four Posi screws. (These are part of the
mounting frame.)
3. Position the black plate on the SPSx50 GPS receiver.
SPS550H GPS receiver
Other SPSx50
GPS receiver