User's Manual

7 Configuring the Receiver Settings

78 SPSx50 Modular GPS Receiver User Guide

You should use the WinFlash software to configure the Ethernet settings of a receiver

that is to be connected to a network that requires static IP addresses. If a network

requires static IP addresses, contact the network administrator for the correct settings

for the SPSx50 receiver.

To configure the Ethernet settings using the WinFlash software:

1. Connect the SPSx50 receiver to a computer running the WinFlash software

using the serial cable provided with the receiver.

2. Turn on the SPSx50 receiver.

3. On the computer, start the WinFlash software.

4. From the Device screen, select Trimble SPSx50 Receiver, and then from the PC

serial port list, select the appropriate PC serial port. Click