User's Manual

Cabling Configurations
The AQUA is typically configured as a rover, but the cables and adapters necessary for
other configurations are also available.
Table 4.2 summarizes the cabling items available or provided with the AQUA unit or
available accessories.
Table 4.2 AQUA cabling and power accessories
Item Part number
Power and I/O cable for machine
installations, 5 m (17 ft) 8-pin female
Bendix connector on each end
32942-17
Infrastructure/Base Station power and I/O
cable, 7.5 m(25 ft) 8-pin female Bendix,
with Y-split to TA-3 power connector,
DBF-9, plus 12-pin Conxall
38968-25
Machine service cable (21-pin female
Bendix, with Ysplit to bare power leads
and dual DBF-9 connector
36938
DC power adapter cable with TA-3
connector and battery clips
44087-00
Reference Station/Configuration cable, 30
m (99 ft)
40942-99
Power and I/O Cable for Machine Installations
Machine Service Cable
Figure 4.10 shows cable 40942-xx when used to configure AQUA
radios with a laptop.
Figure 4.10 Machine service cable (PN 40942-xx)
Antenna Description
The standard AQUA antenna is a 0 dB, low-profile antenna. An optional infrastructure
installation kit comes with an antenna base and 5 dB whip antenna tip. The 5 dB antenna
measures 81 cm (32") in length, including the base. See Figure 4.11.
Figure 4.11 AQUA with antennas