User's Manual Part 3

GeoExplorer 2008 Series User Guide 87
Getting Connected 6
– a computer to access ActiveSync, select ActiveSync.
Note – For more information on the types of devices that the GeoExplorer 2008 series
handheld can connect to, and the supported Bluetooth services, see Connecting to a
Bluetooth device as a client, page 105.
9. Tap
Finish on the right softkey.
10. Tap
OK in the top right corner of the screen to close the Bluetooth application.
11. Tap in the top right corner to close the Settings screen.
You have now created a partnership between the GeoExplorer 2008 handheld and the
other Bluetooth-enabled device so that they can communicate. To start using the
connection, you must complete the configuration steps for that type of connection and
then connect to the device. For more information, see:
• Connecting to a Bluetooth-enabled phone for Internet access or real-time
corrections (including VRS networks), page 88
• Connecting to a Bluetooth-enabled serial device, page 94
• Connecting to an office computer to use ActiveSync technology, page 97