User Manual

TMCM-3230 TMCL

™

Firmware Manual • Firmware Version V1.07 | Document Revision V1.05 • 2017-OCT-10

12 / 103

3.3 Standalone Applications

The module is equipped with a TMCL memory for storing TMCL applications. You can use the TMCL-IDE for

developing standalone TMCL applications. You can download a program into the EEPROM and afterwards

it will run on the module. The TMCL-IDE contains an editor and the TMCL assembler where the commands

can be entered using their mnemonic format. They will be assembled automatically into their binary

representations. Afterwards this code can be downloaded into the module to be executed there.

Terms of delivery and rights to technical change reserved.

Download newest version at www.trinamic.com