User Manual

TMCM-3230 TMCL
™
Firmware Manual • Firmware Version V1.07 | Document Revision V1.05 • 2017-OCT-10
48 / 103
Wait for motor 0 to reach its target position, without timeout.
Mnemonic: WAIT POS, 0, 0
Binary Form of WAIT POS, 0, 0
Field Value
Target address 01
h
Instruction number 1B
h
Type 01
h
Motor/Bank 00
h
Value (Byte 3) 00
h
Value (Byte 2) 00
h
Value (Byte 1) 00
h
Value (Byte 0) 00
h
Checksum 1D
h
©2017 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at www.trinamic.com