User Manual

TMCM-3351 CANopen® Firmware Manual • Firmware Version V3.22 | Document Revision V1.01 • 2019-FEB-14
131 / 145
Operation Mode specific Bits in cst Mode
Bit Name Definition
10 Reserved Not used.
12 Target torque ignored 0: Target torque ignored.
1: Target torque used as input to control loop.
13 Reserved Not used.
Table 390: Operation Mode specific Bits in cst Mode
State Coding
Status word FSA state
xxxx xxxx x0xx 0000
h
Not ready to switch on
xxxx xxxx x1xx 0000
h
Switch on disabled
xxxx xxxx x01x 0001
h
Ready to switch on
xxxx xxxx x01x 0011
h
Switched on
xxxx xxxx x01x 0111
h
Operation enabled
xxxx xxxx x00x 0111
h
Quick stop active
xxxx xxxx x0xx 1111
h
Fault reaction active
xxxx xxxx x0xx 1000
h
Fault
Table 391: State Coding
Object Description
Index Name Object Type Data Type
6041
h
Controlword Variable UNSIGNED16
Table 392: Object Description (6041
h
in cst Mode)
Entry Description
Sub-index Access PDO Mapping Value Range Default Value
0 rw see CiA402-3 See state coding above
Table 393: Entry Description (6041
h
in cst Mode)
11.1.3 Object 6062
h
: Position Demand Value
This object provides the demanded position value. The value is given in microsteps. Object 6062
h
indicates
the actual position that the motor should have. It is not to be confused with objects 6063
h
and 6064
h
.
©2019 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at www.trinamic.com