ACCESSORIES Accessories for Stepper & BLDC Motors TMCS-28 Hardware Manual Hardware Version V1.00 | Document Revision V1.01 • 2017-Aug-14 TMCS-28 is a low-cost and small-size optical incremental encoder for use with stepper motors and 3-phase PMSM/BLDC motors. It comes with high resolution optical code wheels with a resolution of up to 10K lines.
/ 13 TMCS-28 Hardware Manual • Hardware Version V1.00 | Document Revision V1.01 • 2017-Aug-14 Contents 1 Order Codes 2 Technical Specifications 2.1 Mechanical and Electrical Parameters 2.2 Signals and Connection . . . . . . . . 2.3 Wave Form . . . . . . . . . . . . . . . . 2.4 Mechanical Drawings . . . . . . . . . . 2.5 Motor Assembly . . . . . . . . . . . . . 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TMCS-28 Hardware Manual • Hardware Version V1.00 | Document Revision V1.01 • 2017-Aug-14 1 3 / 13 Order Codes Order Code Description Size (LxWxH) TMCS-28-5-10000-AT-01 Encoder Module 28mmm diameter, Resolution of 10K lines (40K increments), ABN, 5mm shaft diameter, TTL 28mm x 28mm x 18mm TMCS-28-6.35-10000-AT-01 Encoder Module 28mmm diameter, Resolution of 10K lines (40K increments), ABN, 6.
/ 13 TMCS-28 Hardware Manual • Hardware Version V1.00 | Document Revision V1.01 • 2017-Aug-14 2 2.1 Technical Specifications Mechanical and Electrical Parameters Parameter Min Typ Max Unit Supply voltage 4.5 5 5.5 V Supply current 100 mA Rise/fall time 100 ns Frequency 300 kHz Output Voltage "‘H"’ 2.4 V Input Voltage "‘L"’ 0.4 V Max. output current 20 mA Resolution 40.
TMCS-28 Hardware Manual • Hardware Version V1.00 | Document Revision V1.01 • 2017-Aug-14 2.2 5 / 13 Signals and Connection Pin Number Color Signal Name 1 Red VCC 2 Black GND 3 White A+ 4 White/Black A- 5 Green B+ 6 Green/Black B- 7 Yellow Z+ 8 Yellow/Black Z- 9 Blue Shield Table 5: Connector and cable pinning and signals The required encoder cable connector is a Molex type 5023800900 CLIK-MATE™ crimp housing using Molex type 5023810000 CLIK-MATE™ crimp terminals.
TMCS-28 Hardware Manual • Hardware Version V1.00 | Document Revision V1.01 • 2017-Aug-14 2.3 Wave Form Figure 2: Wave form for CCW and CW rotation ©2017 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany Terms of delivery and rights to technical change reserved. Download newest version at www.trinamic.com Read entire documentation.
TMCS-28 Hardware Manual • Hardware Version V1.00 | Document Revision V1.01 • 2017-Aug-14 2.4 Mechanical Drawings Figure 3: Bottom view, side view, and cut view (units = mm) ©2017 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany Terms of delivery and rights to technical change reserved. Download newest version at www.trinamic.com Read entire documentation.
TMCS-28 Hardware Manual • Hardware Version V1.00 | Document Revision V1.01 • 2017-Aug-14 2.5 Motor Assembly Figure 4: Required dimensions for motor assembly (units = mm) ©2017 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany Terms of delivery and rights to technical change reserved. Download newest version at www.trinamic.com Read entire documentation.
TMCS-28 Hardware Manual • Hardware Version V1.00 | Document Revision V1.01 • 2017-Aug-14 3 9 / 13 Figures Index 1 Connection and circuit diagram for the line driver outputs . . . . . . . . . . . 3 5 4 2 Wave form for CCW and CW rotation 6 ©2017 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany Terms of delivery and rights to technical change reserved. Download newest version at www.trinamic.com Read entire documentation. Bottom view, side view, and cut view (units = mm) . . . . . . . . . . .
TMCS-28 Hardware Manual • Hardware Version V1.00 | Document Revision V1.01 • 2017-Aug-14 4 10 / 13 Tables Index 1 2 3 4 Order codes . . . . . . . . . . Electrical Characteristics . . . Mechanical Specifications . . Environmental Specifications . . . . . . . . . . . . . . . . . . . . 3 4 4 4 ©2017 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany Terms of delivery and rights to technical change reserved. Download newest version at www.trinamic.com Read entire documentation.
TMCS-28 Hardware Manual • Hardware Version V1.00 | Document Revision V1.01 • 2017-Aug-14 5 11 / 13 Supplemental Directives 5.1 Producer Information 5.2 Copyright TRINAMIC owns the content of this user manual in its entirety, including but not limited to pictures, logos, trademarks, and resources. © Copyright 2017 TRINAMIC. All rights reserved. Electronically published by TRINAMIC, Germany.
TMCS-28 Hardware Manual • Hardware Version V1.00 | Document Revision V1.01 • 2017-Aug-14 12 / 13 or of any other nature are made hereunder with respect to information/specification or the products to which information refers and no guarantee with respect to compliance to the intended use is given. In particular, this also applies to the stated possible applications or areas of applications of the product.
TMCS-28 Hardware Manual • Hardware Version V1.00 | Document Revision V1.01 • 2017-Aug-14 6 Revision History 6.1 Hardware Revision Version Date Author Description 1.00 01.03.2017 TMC Initial release Table 6: Hardware Revision 6.2 Document Revision Version Date Author Description 1.00 23.02.2017 SK Initial release 1.01 14.08.2017 SK Correct hollow diameter and resolution on page 4 Table 7: Document Revision ©2017 TRINAMIC Motion Control GmbH & Co.