Instructions / Assembly

ASSEMBLY INSTRUCTIONS

STEP 6: INSTALLING SHELVES

D (40) C (4)

Screw the TOP POLE (A) into the BOTTOM POLE

(B). The tops of these poles are indicated by the

BLACK END CAP.

STEP 5: INSTALLING TOP POLES

A (4)

On POLE (A+B), place 1 pair of SLIP SLEEVES (D) at the desired

distance between SHELVES (C). Please make sure the arrow

faces up and that the word “TOP” is right side up. Do this for

each POLE (A+B), and make sure that the heights are

identical for each POLE (A+B).

Lower SHELF (C) over the TOP POLES (A) so that the corner

cylinders of the SHELF (C) are positioned over the SLIP

SLEEVES (D).

Repeat Step 6 to install other SHELVES (C) as desired.

**Use a rubber mallet, if needed, to secure the SHELVES (C).