Warranty

ASSEMBLY INSTRUCTIONS

Screw TOP POLE (B) into BOTTOM POLE (A).

The tops of these poles are indicated by the

BLACK END CAP.

Repeat for remaining 3 TOP POLES (B).

B (4)

On BOTTOM POLE (A), place 1 pair of SLIP SLEEVES (D) at the

desired height between SHELVES (C). Please make sure the

arrow faces up and that the word “TOP” is right side up. Do

this for each BOTTOM POLE (A), and make sure that the

heights are identical for each BOTTOM POLE (A).

Lower SHELF (C) over BOTTOM POLES (A) so that the corner

cylinders of SHELF (C) are positioned over SLIP SLEEVES (D).

Repeat Step 3 to install other SHELVES (C) as desired.

Note: Use a rubber mallet, if needed, to secure SHELVES (C).

D (8) C (1)

STEP 3

STEP 4