Instructions / Assembly

ASSEMBLY INSTRUCTIONS

STEP 3: INSTALLING BOTTOM SHELF

Place SHELF (C) on its side and slide the (4) BOTTOM POLES (A)

through the holes in the SHELF (C). Make sure that the SHELF

Stand the unit upright.

*Note: The level side of the SHELF (C) is the TOP side (the

TRINITY logo on the corner cylinders should be right-side up.)

**Use a rubber mallet, if needed, to secure the SHELF (C).

***For convenience, place BOTTOM POLES (A) with Locking

Casters on the long side of the shelf if the rack will be pushed

against a wall OR if the rack is frequently rolled around like a

cart place BOTTOM POLES (A) with Locking Casters on the side

being pushed or pulled.

C (1)

STEP 4: INSTALLING SHELVES

On POLE (A), place 1 pair of SLIP SLEEVES (E) at the desired

distance between SHELVES (C). Please make sure the arrow

faces up and that the word “TOP” is right side up. Do this for

each POLE (A), and make sure that the heights are identical

for each POLE (A).

Lower SHELF (C) over the BOTTOM POLES (A) so that the

corner cylinders of the SHELF (C) are positioned over the SLIP

SLEEVES (D).

Repeat Step 4 to install other SHELVES (C) as desired.

**Use a rubber mallet, if needed, to secure the SHELVES (C).

D (8) C (1)