Instructions / Assembly

ASSEMBLY INSTRUCTIONS

STEP 6: INSTALLING SHELVES

D (32) C (4)

Screw the TOP POLE (B) into the BOTTOM

POLE (A). The tops of these poles are

indicated by the BLACK END CAP.

STEP 5: INSTALLING TOP POLES

B (4)

On POLE (A+B), place 1 pair of SLIP SLEEVES (D) at

the desired distance between SHELVES (C). Please

make sure the arrow faces up and that the word “TOP”

is right side up. Do this for each POLE (A+B), and make

sure that the heights are identical for each POLE (A+B).

Lower SHELF (C) over the TOP POLES (B) so that the

corner cylinders of the SHELF (C) are positioned over

the SLIP SLEEVES (D).

Repeat Step 6 to install other SHELVES (C) as desired.

**Use a rubber mallet, if needed, to secure the

SHELVES (C).