Instructions / Assembly

ASSEMBLY INSTRUCTIONS

STEP 4: INSTALLING TOP POLES

Screw the TOP POLE (B) into the BOTTOM

POLE (A). The tops of these poles are

indicated by the BLACK END CAP.

B (4)

STEP 3: INSTALLING SHELVES

On POLE (A), place 1 pair of SLIP SLEEVES (E) at the

desired distance between SHELVES (C). Please make

sure the arrow faces up and that the word “TOP” is right

side up. Do this for each POLE (A), and make sure that

the heights are identical for each POLE (A).

Lower SHELF (C) over the BOTTOM POLES (A) so that

the corner cylinders of the SHELF (C) are positioned

over the SLIP SLEEVES (D).

Repeat Step 3 to install other SHELVES (C) as desired.

**Use a rubber mallet, if needed, to secure the

SHELVES (C).

D (8) C (1)