Instructions / Assembly

ASSEMBLY INSTRUCTIONS

STEP 3: INSTALLING BOTTOM SHELF

Place SHELF (C) on its side and slide the (4) BOTTOM

POLES (B) through the holes in the SHELF (C). Make

sure that the SHELF (C) corner cylinders are positioned

over the SLIP SLEEVES (D).

Stand the unit upright.

*Note: The level side of the SHELF (C) is the TOP side

(the TRINITY logo on the corner cylinders should be right-

side up.)

**Use a rubber mallet, if needed, to secure the SHELF (C).

***For convenience, place BOTTOM POLES (B) with

Locking Casters on the long side of the shelf if the rack will

be pushed against a wall OR if the rack is frequently rolled

around like a cart place BOTTOM POLES (B) with Locking

Casters on the side being pushed or pulled.

C (1)

STEP 4: INSTALLING SHELVES

On BOTTOM POLE (B), place 1 pair of SLIP SLEEVES

(E) at the desired distance between SHELVES (C).

Please make sure the arrow faces up and that the word

“TOP” is right side up. Do this for each BOTTOM POLE

(B), and make sure that the heights are identical for

each BOTTOM POLE (B).

Lower SHELF (C) over the BOTTOM POLES (B) so that

the corner cylinders of the SHELF (C) are positioned

over the SLIP SLEEVES (D).

Repeat Step 4 to install other SHELVES (C) as desired.

**Use a rubber mallet, if needed, to secure the

SHELVES (C).

D (8) C (1)