Instructions / Assembly

ASSEMBLY INSTRUCTIONS

Place SHELF (C) on its side and slide each BOTTOM POLE (A)

through each corner cylinder on SHELF (C). Make sure SHELF (C)

corner cylinders are positioned over SLIP SLEEVES (D).

Stand the unit upright.

Note:

• Level side of SHELF (C) is TOP side (TRINITY logo on corner

cylinders should be right-side up.)

• Use a rubber mallet, if needed, to secure SHELF (C).

• For convenience, place BOTTOM POLES (A) with Locking

Casters on long side of shelf if rack will be pushed against a

wall, OR, if rack is frequently rolled around like a cart, place

BOTTOM POLES (A) with Locking Casters on the side being

pushed or pulled.

C (1)

On BOTTOM POLE (A), place 1 pair of SLIP SLEEVES (D) at

desired height between SHELVES (C). Make sure arrow faces

up and word "TOP" is right side up. Do this for each BOTTOM

POLE (A) and make sure height is identical for each BOTTOM

POLE (A).

Lower SHELF (C) over each BOTTOM POLE (A) so corner

cylinders of SHELF (C) are positioned over SLIP SLEEVES (D).

Note:

• Shelves are adjustable in 1" increments and can be placed

as needed to best fit storage needs.

• Use a rubber mallet, if needed, to secure SHELF (C).

D (8) C (1)

STEP 3

STEP 4