Instructions / Assembly

A (4)

ASSEMBLY INSTRUCTIONS

Stationary Option

Screw each FEET LEVELER (F) into bottom of each

BOTTOM POLE (A). Turn clockwise to screw in place.

Mobile Option

Screw each CASTER (E) into bottom of each BOTTOM

POLE (A). Turn clockwise to screw in place. Make sure

locking casters are on the same side.

Use provided caster wrench to tighten completely.

Failure to do as instructed could result in caster stem

breaking.

For easiest assembly, do not attach TOP POLES (B) and

BOTTOM POLES (A) until instructed. Once connected,

these will be posts for the rack.

Note that POLES (A+B) have slight horizontal line

indentations at 1” intervals. Each SLIP SLEEVE (D) has

raised horizontal lines inside designed to lock them in

place on POLES (A+B).

On BOTTOM POLE (A), place one pair of SLIP SLEEVES (D)

at desired height no higher than 3rd indentation from

bottom. Please make sure arrow faces up and word “TOP”

is right side up.

Slide pair of SLIP SLEEVES (D) until you hear a click to

confirm the pair is locked onto BOTTOM POLE (A). Do this

for each BOTTOM POLE (A) and make sure height is

identical for each BOTTOM POLE (A). Do NOT place more

than one pair on each pole at a time.

A (4) D (8)

Note: There will be a very small gap in-between two locked SLIP SLEEVES (D)—this is normal.

E (4) F (4)

STEP 1

STEP 2